Great Acoustics—The Collings Custom ‘Austin City Limits’ C10

Built with salvaged stage wood and Texas tonewoods, this one-of-a-kind commemorative guitar has a built-in history.

Collings-AustinCity-Limits-C10-guitar-Joe Bastura/Collings Guitars
Joe Bastura/Collings Guitars

A couple years back, Collings general manager Steve McCreary got a call from Chris Collins, a guitarist and producer with PBS’ Austin City Limits, about building a commemorative instrument for the iconic show’s 50th anniversary. “They brought us into this big room at the studio,” McCreary recalls, “and it was stacked with pieces of the original stage. I’d been to a bunch of tapings back in the ’70s, so seeing all that brought back a lot—and it felt like an incredible opportunity to support the show and its history.”

Collings-AustinCity-Limits-C10-guitar-Joe Bastura/Collings Guitars
Joe Bastura/Collings Guitars

The result was a one-of-a-kind Collings C10. The top was milled from a board of cedar salvaged from the show’s original stage at the University of Texas campus. “It was this two-by-eight board with 50 years of every different kind of paint on it,” says head luthier Steve Nall. “Really funky stuff.” Most of the remaining stage material turned out to be plywood, so that single cedar board became the foundation. “That’s what we were forced to use,” Nall says. “And the C10 was the biggest guitar we could get out of it.”

ADVERTISEMENT

Collings-AustinCity-Limits-C10-guitar-Joe Bastura/Collings Guitars
Joe Bastura/Collings Guitars

Bolt and screw holes from the stage’s construction, which go all the way through the wood, were left visible in the finished top. “We didn’t want to apologize or try to cover up the holes,” Nall says. “I laid out the braces to miss them. That’s part of the story of the stage—and the guitar.”

Collings-AustinCity-Limits-C10-guitar-Joe Bastura/Collings Guitars
Joe Bastura/Collings Guitars

The back and sides are Texas pecan, sourced locally from the Berdoll Sawmill just southeast of Austin, and the bridge, fretboard, and headplate are made from Texas royal ebony. Custom inlays mark the milestone, with stars on the fingerboard and peghead and “1974–2024” at the 12th fret.

ADVERTISEMENT

Collings-AustinCity-Limits-C10-guitar-Joe Bastura/Collings Guitars
Joe Bastura/Collings Guitars

The guitar was auctioned to support Austin City Limits and Austin PBS, with bidders seeing a mock-up before the guitar was completed. “It was a bit unusual,” McCreary says, “but the goal was to raise funds for this beloved institution—and we were honored to be a part of it.”

Collings-AustinCity-Limits-C10-guitar-Joe Bastura/Collings Guitars
Joe Bastura/Collings Guitars

“It was probably the first time we made an acoustic out of all local woods,” adds Nall. “And we’ve continued to do it—mesquite, live oak, red oak. This project really opened the door for us.”

Collings-AustinCity-Limits-C10-guitar-Joe Bastura/Collings Guitars
Joe Bastura/Collings Guitars

McCreary adds, “It sounded good and looked great. Whoever ended up with it has a piece of history.”

Acoustic Guitar magazine cover for issue 355

This article originally appeared in the November/December 2025 issue of Acoustic Guitar magazine.

Adam Perlmutter
Adam Perlmutter

Adam Perlmutter holds a bachelor of music degree from the University of North Carolina-Greensboro and a master's degree in Contemporary Improvisation from the New England Conservatory. He is the editor of Acoustic Guitar.

Leave a Reply

Your email address will not be published. Required fields are marked *